With money being tight today, maybe the answer to giving your car a fresh look will be to indulge in several car spray painting. If the mechanics of it are in good shape, but the body is not so hot, then painting it will be the best solution.

It’s a fantastic money-saver, but even more so if you do it yourself as opposed to getting it professionally done. You can do it if you study the fundamentals and follow the instructions for car spray painting. Its important though if you decide you’re going to take on this project that you’re ready to see it complete till the end.

First of all, you require various supplies. These comprise of:

• coverings to protect the unpainted areas and masking tape to hold these in place
• a good car-wash soap and brush as well as a wax/grease remover
• several grits of sand-paper -primers and paint that’s urethane base for the car spray painting
• paint sprayer
• safety equipment like masks, goggles and protective clothing
• knife and putty for fill ins.

Now let’s look at the 6 steps for spray painting:

1. You must be certain that you wash the car thoroughly to take out all grime and debris. If you do not then these things would be set in with your paint, leaving a very daunting look to the finished job. Follow up with a wax/grease remover so the paint you apply for the car spray painting will adhere the right way.
2. Get rid of any rough spots by sanding. Once this has been done be certain to rinse off the loose sandings. This is where you’ll want to utilize the putty to fill in any minor pit marks, that have been caused from stones for instance.
3. Don’t get in too much of a rush to begin your car spray painting. The car must be completely dry so its best to leave it to do so for several hours. You could go ahead and cover whatever of the areas that your do not want to get paint on.
4. Presently you are ready to begin with the primer. Do not skip this step, as it will give a much better look to the finished project. It helps the paint to adhere the right way and allows for a more even finish. Next, once the primer is dry you would need to gently sand it down.
5. You’re finally at the step you have been waiting for. It’s time to apply the color for your car spray painting. Whether you’ve chosen to use aerosol paints or a spray gun, the premise remains the same. Only apply thin coats. Several will probably be essential. A Couple light coats are much better than 1 thick coat. You’ll be able to tell just by looking at the car how many more coats of paint it’ll need. Various will only require 2 whereas a few others may require 3 or 4.
6. Finally, down to the last step and that’s applying the clear coat. This is done precisely the same as the colored coats.

Now you can enjoy you like-new car.